Live Help: (888) 488-0040
| Custom Fireplace Screens & Doors FREE Design Service |
1: Send us pictures of your fireplace 2: We create FREE Mockups 3: You choose the look you like best! |
 |
| Custom Fireplace Screens & Doors FREE Design Service |
1: Send us pictures of your fireplace 2: We create FREE Mockups 3: You choose the look you like best! |
|
Customer Comments: I'm trying to get glass doors for my fireplace. The first picture is what I would like for the doors to look like. The color in the pic is a brushed copper. The measurements for the width are 48 5/8" wide at the narrowest point and 49" wide at the widest point. The height is 31 3/8" at the lowest and 31 3/4" at highest. Thanks.
Our Comments: Below are examples of doors from two different brands similar to the example you provided from the online Stoll Visualizer tool. The main difference between the brands is the ability to burn a fire with the doors closed, so be sure to read the notes. We will discuss this in detail over the phone.
Fireplace Opening: 48 5/8-49" W x 31 3/8-31 3/4" H
Before:
These doors are made from laser cut steel and cannot be burned with the doors closed unless they are made with ceramic glass, which is very expensive.
Option #1A: Hearth Creations Flat Steel Door with Airseal Door Frames in Burnished Copper. Shown with Clear Glass and Gate Mesh Backup Doors.
Option #1B: Hearth Creations Flat Steel Door with Airseal Door Frames in Burnished Bronze. Shown with Clear Glass and Gate Mesh Backup Doors.
Option #1C: Hearth Creations Flat Steel Door with Airseal Door Frames in Rust Patina. Shown with Clear Glass and Gate Mesh Backup Doors.
These doors are made from laser cut steel and CAN be burned with the doors closed using their standard 1/4" thick tempered glass, so they will be a little less expensive.
Option #2A: Design Specialties Legend Fireplace Glass Door With Tight Fitting Doors in Rustic Copper. Shown with Clear Glass and Gate Mesh Backup Doors.
Option #2B: Design Specialties Legend Fireplace Glass Door With Tight Fitting Doors in Burnished Copper. Shown with Clear Glass and Gate Mesh Backup Doors.
Option #2C: Design Specialties Legend Fireplace Glass Door With Tight Fitting Doors in Burnished Bronze. Shown with Clear Glass and Gate Mesh Backup Doors.
Shown Above: Example provided using the Stoll Visualizer Tool.
Fig #1 - Closeup
Fig #2 - Room Setting
If you are planning on burning anything in your fireplace, you need to have mesh behind the glass so you can burn a fire with the doors open. You can chooe between gate mesh backup doors and sliding mesh curtains. Functionally, gate mesh performs the best as the wire has smaller holes that sparks cannot get through. Aesthetically, mesh curtains may be preferred because they do not have a vertical center frame that obstructs the view of the fire. When you are not using the fire or you want a complete unobstructed view, they do not stick out like gate mesh doors when they are opened.
We are showing these options on a flat steel bifold door with a satin brass overlay and gray glass.
Scale & Finish Disclaimer: Mockups shown on this site are not necessarily to scale and are meant to help you choose the style of your screen or door. The appearance of finishes represented may vary between digital monitors and screens. I do my best to recommend finishes that I believe will blend with your decor and flatter your fireplace. You can view finish options here:
Hearth Creations Finishes
Design Specialties Finishes
Stone Manufacturings Trims & Finishes
Samples for some finishes are available upon request.
"I have a passion for designing custom fireplace treatments, and have been doing so for over 35 years. The designs I create are not only tailored to fit perfectly, but fashioned to compliment your room decor and turn your fireplace into a tastefully finished focal point. Take advantage of my Free Design Service and let me show you the possibilities." Here are just a few reasons why you might consider buying from me:
Greg Tillotson (Owner/Designer)
Picture #1: With your camera sideways, take a picture directly in front of the fireplace from far enough away to see the entire fireplace floor to ceiling like this.
|
 Picture #2: With your back to the fireplace, take a picture looking straight out into the room so we can see the decor directly in front of the fireplace.
|
Please remove all objects from in front of the fireplace opening before you take your pictures (existing screen, plants or anything else). If you have an existing glass door, take pictures with the doors open and closed.
Once I recieve your pictures, I will create several mockups and post them to a project page and send you a link to view and them with others for their input. I will follow up with you to discus your project, quote prices and help you choose the treatment that suits you best.
View Examples In My Photo Gallery
 |
 |
 |
 |
 |
