Custom Fireplace Screens & Doors FREE Design Service |
1: Send us pictures of your fireplace 2: We create FREE Mockups 3: You choose the look you like best! |
![]() |
Customer Comments: Looking to do a semi inset fireplace of your Profile 4 Model
Our Comments: The Profile-4 is a great look for an inside fit because it has a very narrow frame. If you are burning real wood, it must be burned with the doors open, so it may not be the best choice. There are other manufacturers that make doors with the very same look that can be burned with the doors closed. One with tempered glass and the other with tempered or ceramic glass. I have included each of these options. I also added an additional door that looks very much like your original drawing.
Tempered vs Ceramic Glass: Tempered glass can handle sustained temperatures up to about 450F without breaking from heat and should be at least 8” from the flames. Ceramic glass can handle temperatures up to about 1450F and can have direct contact with the flames. If you wish to burn fires with the doors closed, I highly recommend upgrading to ceramic glass.
Fireplace Opening: 36 1/2" W x 44 1/2" H
Aluminum is an excellent material for fireplace doors because it does not rust and can handle high temperatures when treated with powder coated finishes. It is also the most affordable.
These doors are hand crafted by skilled artisans from Solid Brass or Steel, depending on the finish that is desired. Very high end, and very refined. Items made from solid brass come in a wide variety of hand crafted patinas and other finishes. Satin Nickel finishes done on solid brass are the finest quality and will not rust like plated steel.
These doors are made from solid steel wrapped with satin brass plated sheet metal. You will see seems where the metal meets on all 4 sides. Ceramic glass is required in order to burn with the doors closed. This manufacturer does not offer ceramic glass that is not framed, so you must have framed panels as shown below when adding ceramic glass.
These doors are made from brass plated steel with a heat resistant coating that never needs to be polished. You can burn fires with the doors closed with either tempered or ceramic glass. In this case, tempered glass should be sufficient as the door will be well away from the fire if set midway in the tile opening.
If you are planning on burning anything in your fireplace, you need to have mesh behind the glass so you can burn a fire with the doors open. You can chooe between gate mesh backup doors and sliding mesh curtains. Functionally, gate mesh performs the best as the wire has smaller holes that sparks cannot get through. Aesthetically, mesh curtains may be preferred because they do not have a vertical center frame that obstructs the view of the fire. When you are not using the fire or you want a complete unobstructed view, they do not stick out like gate mesh doors when they are opened.
We are showing these options on a flat steel bifold door with a satin brass overlay and gray glass.
Scale & Finish Disclaimer: Mockups shown on this site are not necessarily to scale and are meant to help you choose the style of your screen or door. The appearance of finishes represented may vary between digital monitors and screens. I do my best to recommend finishes that I believe will blend with your decor and flatter your fireplace. You can view finish options here:
Hearth Creations Finishes
Design Specialties Finishes
Stone Manufacturings Trims & Finishes
Samples for some finishes are available upon request.
"I have a passion for designing custom fireplace treatments, and have been doing so for over 35 years. The designs I create are not only tailored to fit perfectly, but fashioned to compliment your room decor and turn your fireplace into a tastefully finished focal point. Take advantage of my Free Design Service and let me show you the possibilities." Here are just a few reasons why you might consider buying from me:
Greg Tillotson (Owner/Designer)
![]() |
![]() |
Please remove all objects from in front of the fireplace opening before you take your pictures (existing screen, plants or anything else). If you have an existing glass door, take pictures with the doors open and closed.
Once I recieve your pictures, I will create several mockups and post them to a project page and send you a link to view and them with others for their input. I will follow up with you to discus your project, quote prices and help you choose the treatment that suits you best.
View Examples In My Photo Gallery