Custom Glass Fireplace Screens

Stone Manufacturing Glass Fireplace Screens

Glass screens made by Stone Manufacturing are custom made to fit your fireplace and have a wide variety of options. Be sure to check out the Glass and Feet Options Below to design your own screen. Starting prices shown are for sizes up to 36" W x 30" Tall in Flat Black or Polished Brass. Final Price will vary widely based on the size, hardware finish and design. The glass is fully tempered safety glass and in many cases the thickness of the glass can be 1/4", 3/8" or 1/2". Thicker glass provides more elegance. They can also make your screen with ultra clear low iron glass or with beveled edges or decorative etchings for a very elegant look.

Size Limitations: Maximum size is 60" Wide x 46" Tall. Standard 4x4xs channel feet are limited to 42" Wide x 34" Tall. Larger glass panes require larger feet. See feet options below

Glass Colors

Ultra Clear (Low Iron) glass, often referred to as "Starphire" glass, does not have the typical green hue as normal clear glass. It is nearly double the price of clear glass but has a very upscale crystal clear look to it, with an aqua blue edge. For the ultimate appearance of luxury, order your glass screen with 1/2" thick Starphire glass if you can afford it! Graylite-14 is an upgraded glass that is about 50% darker than normal gray or bronze, which is great if you need to obscure what's inside the fireplace. Clear, Graylite-14, Gray and Bronze glass are available in 1/4", 3/8" and 1/2" thickness. Ultra-Clear Low Iron glass is available in 3/8" or 1/2" thickness only.

Feet Options

The feet below are made from solid brass by Stone Manufacturing and are available in a Wide Variety of Finishes including polished brass, nickel, chrome (as shown), bronze, gold etc. They are designed to accommodate 1/4", 3/8" and 1/2" thick tempered safety glass which is held in place by rubber pressure screws tightened with allen wrench. Channel Feet are available in 4"x4"x2" and 6"x6"x3" sizes and Block Feet in 4", 5" and 6" blocks. Block feet are made from heavy chunks of solid brass (they are not hollow), so they are more stable and costly than channel feet. All feet are available with optional felt pads. Block feet are available with optional roller bearings for easy movement on smooth flat surfaces.

Size Limitations:
Maximum size: 60" Wide x 46" Tall
4x4x2 Channel Feet: Max Width 42" | Max Height: 34"
6x6x3 Channel Feet: Max Width: 60" x Max Height: 46"
4" Block Feet: Max Width 42" | Max Height: 34"
5" Block Feet: Max Width 48" | Max Height: 40"
6" Block Feet: Max Width 60" | Max Height: 46"

Standard Feet

(See Finish Options)

Block Feet

(See Finish Options)

Other Modern Feet

(See Finish Options)
Some of these feet are available in larger sizes

Hearth Creations Glass Fireplace Screens

Hearth Creations has a few unique glass fireplace screen designs shown below, but they can make most of their single panel fireplace screens with glass instead of mesh, so the variety of options is actually quite vast. If you don't see anything you like on this page, take a look at the Custom Single Panel Screens and we can have any of them made as a glass screen. Also, the hardware shown below is available in many finishes, so be sure to explore the Hearth Creations Finishes as well.

Size Limitations: Maximum size: 48" wide x 36" high

Feet and Base Sold Separately

If you wish to provide your own glass, you can purchase the Modern Feet or Modern Base separately. These are designed to hold 3/8" glass up to 70" W x 44" H and are made from stainless steel in brushed stainless, powder coat or premium powder coat finishes. The Modern Base has a minimum price up to 40" Wide with an additional price per inch over 40". The Modern Base can also be made as two separate feet. These are only available as special orders over the phone and take about 3 to 4 weeks for delivery. To Order Call: 1-800-201-1193

Pricing:
Pair Modern Feet: $395.00 (Standard Powder Coat Or Stainless Steel) | $495.00 (Premium Powder Coat)
Single Modern Base: $595.00 + $8/inch over 40" (Standard Powder Coat Or Stainless Steel)| $695.00 + $10/inch over 40" (Premium Powder Coat)